Hot
New
In stock
Out stock

SKU: PTFUME/100ML

Rubio Monocoat Fumed

$7.99

Rubio Monocoat Fumed reacts to the tannin that is naturally found in oak wood, creating a unique, aged gray effect on oak wood species.  This reaction accentuates the underlying characteristics found in the wood.  Since Rubio Monocoat Fumed reacts with the amount of tannic acid that is present in the wood, this pre-treatment will create unique and one of a kind effects. Fumed is user-friendly and does not release any toxic or irritating fumes or vapors. Fumed is to be post-treated with Rubio Monocoat Oil 2C.

For a kit containing samples of the various colors, see our Precolor Easy / Creative Effects Sample Kit page.

100 ML
1 LITER
5 LITER
Spend $49.00 to Free Shipping
ADDITIONAL
HOW TO APPLY
Video
TECHNICAL
MAINTENANCE
CUSTOMER REVIEWS
ADDITIONAL
  • Provides a "graying" effect to the wood
  • Can be post-treated with Rubio Monocoat Oil 2C
  • Releases no toxic fumes or vapors

Fumed is a tannin-reactive product that is used on oak woods. It replicates the aged grey look of wood without causing any toxic fumes or vapors.

The aged look achieved by using Fumed allows for the creation of unique looks and effects.

  • Aged grey look
  • Accentuates the underlying character of the wood
  • No toxic fumes

Product Brochure

HOW TO APPLY

DIRECTIONS FOR MANUAL APPLICATION:

  1. Sand the planks until the desired effect has reached.- Remove any dust.
  2. Apply RMC Fumed regularly using a roller or a brush. If a smooth effect is required saturate the surface completely with the product.
  3. Let the surface dry completely (12 to 48 hours).
  4. Sand the surface lightly with a polisher equipped with a beige pad.
  5. Remove any dust again.
  6. Finish with Rubio Monocoat Oil. 

CONSUMPTION - MANUAL APPLICATION:

Depending on type of wood and preparation:  +/- 215 to 430 g/sq. ft. 

These usages are merely indicative. Results depend on wood type and method of preparation. It is always recommended to make a sample in order to calculate the exact usage. 

DIRECTIONS FOR INDUSTRIAL APPLICATION:

  1. Sand the planks until the desired effect has been reached- Remove any dust.
  2. Apply RMC Fumed regularly using a roller or a spray gun. If a smooth effect is required saturate the surface completely with the product.
  3. Let the surface dry completely – to the air, with a drying tunnel or UV drying.
  4. Sand the surface lightly with a brush sanding machine, flutter or nylon.
  5. Remove any dust again. 

CONSUMPTION - INDUSTRIAL APPLICATION:

Depending on type of wood and preparation: +/- 53 to 161 g/sq. ft. 

These usages are merely indicative. Results depend on wood type and method of preparation. It is always recommended to make a sample in order to calculate the exact usage. 

STORAGE: 

The product can be stored for up to 12 months. Store in dry conditions and in the original packaging. Keep away from frost. 

Application Instructions and TDS (EN)

Application Instructions and TDS (ES)

Video

TECHNICAL

Summarized specifications, please read TDS before using product.

Spread Rate: 200-400 ft²/L
Dry Time: Varies. Test with a moisture meter before and after to ensure full dry.
Dilutable: With Water
Shelf Life: 12 months


Warning: Do not allow to freeze

MAINTENANCE

Rubio Monocoat Fumed is a pre-treatment and should be finished with Oil Plus 2C.

Clean with Soap or Surface Care Spray. Maintain color and protection with Universal Maintenance Oil. Refresh and restore with Renew.

CUSTOMER REVIEWS

This site uses cookies to ensure that we give you the best experience on our website.

Rubio Monocoat Fumed

Rubio Monocoat Fumed

$7.99